Specifications for Kerb stones

• The face of the kerb stone shall not exhibit defects such as cracking or flaking when examined
• For Kerbs if produced with facing layer, the facing layer shall have a minimum thickness of 4MM over that area claimed by the manufacturer to be faced
• For Faces Described as a flat and edge described as straight, the permissible deviations on flatness and straightness.
• The kerbstone material must be tested at the manufacturer’s laboratory before dispatch for: Binding strength, water absorption and dimensional accuracy.

For More Information:

Call Us: +91-9999012399

Email Us: info@brhcpipes.com

Visit Us: www.brhcpipes.com